Description: Wheelsystem: With the wheelsystem, you can easily move your machine.
D.70×L.300 N.52,4 spirals,shearcut
D.70×L.400 N.85,5 spirals,shearcut
Description: This type of spiral cutterhead is designed with a true shear cut. The carbide knives sit at at angle along the helical grooves. It reduces the tear-out of your work, makes smaller chips and less noise than any other type of cutterheads. If one knife edge is dull or nicked, just turn it to another edge in seconds and the cutterhead works pefectly as a new one again. This greatly reduces your down time. Replace the inserts only when four edges are dull. You don't need to replace all the knives as you have to do with the conventional single straight knife. It pays you back in a very short time.
Cutter shaft Tersa(MBM Italian )
The construction concept of this tool allows the automatic block of the cutters in using the centrifugal force. The exactness of the position is guaranteed on all the sharp edge and on the whole length of the planing shaft.
For a correct use of the tool we recommend using the suitable products to clean the support runner of the cutters.
Angle Ruler Pro
In both directions 2 x 45° mitre cross-cut fence. The length is 850mm. Also named: Mitre cross-cut fence
Description: Safety hood for tenoning with diameter capacity 260 mm.
M18×1.5S (Φ1-Φ16) mm
For mortiser function
Model: Mortiser Bits
Working Dia.: 6-8-10-12-14-16