Azienda Prodotti Tecnico Mostra Contattaci
Italiano
  Sistema di spostamento

Model: C300-MW60
Suit for C300 and C400 .

Description:
Wheelsystem: With the wheelsystem, you can easily move your machine.

  Albero elicoidale per pialla

Model: C300-CH52-4S
D.70×L.300 N.52,4 spirals,shearcut
Model: C400-CH85-5S
D.70×L.400 N.85,5 spirals,shearcut

Description:
This type of spiral cutterhead is designed with a true shear cut. The carbide knives sit at at angle along the helical grooves. It reduces the tear-out of your work, makes smaller chips and less noise than any other type of cutterheads. If one knife edge is dull or nicked, just turn it to another edge in seconds and the cutterhead works pefectly as a new one again. This greatly reduces your down time. Replace the inserts only when four edges are dull. You don't need to replace all the knives as you have to do with the conventional single straight knife. It pays you back in a very short time.

  Gognometro pro
Model: C300-ARP850
0-45°×850

Description:
In both directions 2 x 45° mitre cross-cut fence. The length is 850mm.
Also named: Mitre cross-cut fence

        
  Guida a contornare
Model: C300-CF180
For C300/C400/400B

Description:

  Cuffia a tenonare con pianetto
Size: 326×500
For C300/C400/400B
Description:
Safety hood for tenoning with diameter capacity 260 mm.
  Wescott(Mandrino)  
Model:Wescott
M18×1.5S (Φ1-Φ16) mm
For mortiser function
    
  Punte per cavatrice  
Model: Mortiser Bits
Description:(mm)
Shank Dia:16
Working Dia.: 6-8-10-12-14-16
L: 105-115-125-135-145-155
  Mortiser function: Three awl bits  
Model: AWL
Description:(mm)
Shank Dia:6-16
Working Dia.:
Φ6*9-Left- HSS
Φ8*117-Left-HSS
Φ10*120-Left-HSS
Φ12*151-Left-HSS
Φ14*151-Left-HSS
Φ16*160-Left-HSS
  Coltelli per toupie con testa  
Model:TS30
D.120×d.30×H.40
Model:TS35
D.120×d.35×H.40
Model:TS50
D.120×d.50×H.40
  Coltelli pialla  
L.300
300×20×3
L.400
400×20×3
  Lama sega  
D.250
D.250×d.30×3×60T
D.250×d.30×3×40T
D.250×d.30×3×42T
 
D.300
D.300×d.30×72T
  Incisore
D.90
D.90×d.22×3.1×12T
  Milling spindles with “ER20” collets for spindle moulder M14  
Model: ER20M14
Milling spindles with “ER20” collets for spindle moulder S=M14
B=6.35mm
B=12.7mm
B=3~13mm
Choose the corresponding ER elastic plier according to the diameter of the tool holder
ER churck M14 ER20 Elastic pliers ER20-UM Wrench
jiakemu
Qingdao Jiakemu Machinery Manufacture CO.,LTD.
West Of No.2 Tianshan Road Tongji Sub-district Jimo-city Qingdao China 266200
Tel: (86) 0532 6609 5060
Email: jiakemu@163.com
www.jiakemu.com
Qingdao Jiakemu Machinery Manufacture CO.,LTD.  Copyright © 2019