Description: Wheelsystem: With the wheelsystem, you can easily move your machine.
Arbre hélicoidal pour degau-rabo
modèle: C300-CH52-4S
D.70×L.300 N.52,4 spirals,shearcut
modèle: C400-CH85-5S
D.70×L.400 N.85,5 spirals,shearcut
Description: This type of spiral cutterhead is designed with a true shear cut. The carbide knives sit at at angle along the helical grooves. It reduces the tear-out of your work, makes smaller chips and less noise than any other type of cutterheads. If one knife edge is dull or nicked, just turn it to another edge in seconds and the cutterhead works pefectly as a new one again. This greatly reduces your down time. Replace the inserts only when four edges are dull. You don't need to replace all the knives as you have to do with the conventional single straight knife. It pays you back in a very short time.
Goniomètre Pro
modèle: C300-ARP850
0-45°×850
Description:
In both directions 2 x 45° mitre cross-cut fence. The length is 850mm. Also named: Mitre cross-cut fence
Guide à contourner
modèle: C300-CF180
For C300/C400/400B
Description:
Protection à tennoner avec tablette
Size: 326×500
For C300/C400/400B
Description: Safety hood for tenoning with diameter capacity 260 mm.
Wescott(Mandrin)
modèle:Wescott
M18×1.5S (Φ1-Φ16) mm
For mortiser function
Méches pour Mortiseuse
modèle: Mortiser Bits
Description:(mm)
Shank Dia:16
Working Dia.: 6-8-10-12-14-16
L: 105-115-125-135-145-155
