描述: This type of spiral cutterhead is designed with a true shear cut. The carbide knives sit at at angle along the helical grooves. It reduces the tear-out of your work, makes smaller chips and less noise than any other type of cutterheads. If one knife edge is dull or nicked, just turn it to another edge in seconds and the cutterhead works pefectly as a new one again. This greatly reduces your down time. Replace the inserts only when four edges are dull. You don't need to replace all the knives as you have to do with the conventional single straight knife. It pays you back in a very short time.
工业级角度尺
型号: C300-ARP850
0-45°×850
描述:
In both directions 2 x 45° mitre cross-cut fence. The length is 850mm. Also named: Mitre cross-cut fence
曲线铣集尘罩
型号: C300-CF180
适配于C300/C400/400B
描述:
纵向铣集尘罩
尺寸: 326×500
适配于C300/C400/400B
描述: Safety hood for tenoning with diameter capacity 260 mm.
木工变径夹头
型号:Wescott
M18×1.5S (Φ1-Φ16) mm
For mortiser function
木工钻榫刀套装
型号: Mortiser Bits
描述:(mm)
Shank Dia:16
Working Dia.: 6-8-10-12-14-16
L: 105-115-125-135-145-155
